Tag Archives: betco

Betco New Leadership Promotions

New Leadership Promotions at Betco

Paul Betz, Betco® Corporation, CEO, is excited to announce the following Betco Corporation promotions:

Brad Betz has been promoted to the position of President.

Denise Lennard has been promoted to Chief Operating Officer.

Tony Lyons continues as Chief Financial Officer.

“This new team is vital to the growth of our business,” said Paul Betz. “We’re excited about this transition and are looking forward to the future. I trust this team to help lead Betco into a next generation of innovation, advancing our position in the industry.”

Click here to view the full press release.

Bubbles_Featured Image

Triclo—what?: What the Triclosan Ban Means for You

Foam-Soaps-Save-WaterOn September 2, 2016 the Food and Drug Administration (FDA) issued a final ruling that bans 19 active ingredients in hand or body washes. One of the active ingredients affected by this ruling is triclosan, the most widely-used active ingredient in over-the-counter (OTC) consumer antiseptic washes.

So, what does this ruling mean for you? Since this ban affects soaps that you may use at home, in school and other public settings, it’s important to understand what triclosan is and why this ruling took place.

What is triclosan?

Triclosan is an ingredient added to many consumer products like antibacterial soaps, body washes, toothpastes and some cosmetics in order to reduce or prevent bacterial contamination.

Is triclosan safe?

Unfortunately, how triclosan affects human health is not yet known. While there are several ongoing studies that involve the safety of triclosan, there is not enough scientific data to make any claims at this time.

How do I know if triclosan is in a product?

If a soap, body wash or any other product contains triclosan, it should be listed as an ingredient on the label. If you have any questions or concerns about a product you use, call the number listed on the product.

What other chemicals were banned?

In addition to the triclosan ruling, these other chemicals we also banned:

  • Cloflucarban
  • Fluorosalan
  • Hexachlorophene
  • Hexylresorcinol
  • Iodine complex (ammonium ether sulfate and polyoxyethylene sorbitan monolaurate)
  • Iodine complex (phosphate ester of alkylaryloxy polyethylene glycol)
  • Nonylphenoxypoly (ethyleneoxy) ethanoliodine
  • Poloxamer-iodine complex
  • Povidone-iodine 5 to 10 percent
  • Undecoylium chloride iodine complex
  • Methylbenzethonium chloride
  • Phenol (greater than 1.5 percent)
  • Phenol (less than 1.5 percent) 16
  • Secondary amyltricresols
  • Sodium oxychlorosene
  • Tribromsalan
  • Triclocarban
  • Triple dye

This rule goes into effect on September 6, 2017 giving companies a year to remove these ingredients from their products or discontinue the product line within the market. Some states are adopting this ruling early, such as Minnesota that put the ban into effect on January 1, 2017.

This ruling does not affect antibacterial soaps used by healthcare professionals, food industry professionals or consumer antiseptic rubs (i.e. hand sanitizers).

As a part of our innovative hand hygiene platforms, all Betco® skin care solutions comply with this new rule and are triclosan-free.

If you have any questions or want to learn more, please click here.

If you have any questions, please visit www.betco.com, call (888) GO-BETCO or please contact us at welisten@betco.com.

Hunter Giles
6/23/2017

Plant_Blog Photo

Get with the Program: Go Green

Green Water dropThe move toward green cleaning is the next step towards further reducing the impact left on the environment. We can always continue to maintain and improve the health, comfort and aesthetics of our surroundings. We know that green cleaning creates healthier environments, but what does it truly mean to go green?

Sustainable solutions minimize the impact of cleaning on people and the environment. More importantly, it is a process to protect natural resources for the future – not a single product alone. This means meeting the needs of the present without compromising the ability of future generations to meet their own needs.

Going Green is a journey that anyone can participate in. By being environmentally responsible, we can become more knowledgeable about the ingredients we are putting into products, leading to a healthier home and a healthier you. Wondering how you can help? Try these tips to get started:

Save energy: Finished using something? Make sure you shut it off. You can easily conserve energy by turning off the lights or unplugging smaller appliances as soon as you’re done with them.

Save water: No one likes a dripping faucet…especially the environment. From brushing your teeth to watering your garden, it’s important to be conscious of how much water you are using and how you can better conserve it.

Reduce, reuse, recycle: These three R’s are the perfect triple threat. By helping to reduce waste, we can conserve natural resources and energy. When we reuse and recycle, we can avoid creating waste, reducing the amount of trash going to our landfills and keeping the environment healthier.

It’s important to remember that every little bit helps when it comes to conserving natural resources within our environment. You can start out small and still make a positive impact. By focusing on maintaining the balance between people, profit and planet, we can protect our environment now and in the future.

At Betco®, being environmentally responsible is a company standard. We are committed to developing products, programs and procedures that meet or exceed health and environmental standards while providing cost effective benefits to accomplish your maintenance goals. To learn more about our sustainability efforts and complete green program, please visit www.betco.com/solutions/sustainability for more information.

Want to implement a Green Program at your facility? Click here to get started!

HunterGilesRGB
Hunter is the Content Marketing Specialist at Betco.

If you have any questions, please visit http://www.betco.com, call (888) GO-BETCO or please contact us at welisten@betco.com

Matrix_News Image

Matrix™ Polished Concrete &Terrazzo Maintenance System

Innovation That Floors You…

Betco® is excited to announce the Matrix™ Polished Concrete & Terrazzo Maintenance System, the simplest concrete maintenance system on the market. Achieve better looking floors, with a deep gloss and stain resistance in less time. This system effectively combines the right cleaner, sealant infused pads, proper tooling and equipment to make your floor investment easy and affordable.

Matrix Video Play

iBet Phone Image

iBet Facility Resources Suite

 

Introducing iBet®.

The iBet Facility Resources Suite is a comprehensive approach to facility maintenance, training and evaluation.

This cloud-based application provides you with the tools that will empower your facility to operate at the highest efficiency, adding value beyond the product.

iBet News Image

Man Writing 2

Creating a Facility Maintenance Program: Dos and Don’ts

canstockphoto22217883Developing a comprehensive approach to facility maintenance is not always an easy task to accomplish. While there are many best practices for creating a facility maintenance program, the path to finding and implementing a plan that meets the specific needs of your facility can be challenging. With efficiency as a common end goal, facilities are searching for ways to optimize opportunities without increasing costs. Here are some dos and don’ts to help you develop a maintenance plan that fits your facility.

Dos:

  • Expect to Inspect. There is always room for improvement. Pay attention to the areas in which your facility maintenance program could become better. By determining what changes need to be made, you could increase efficiency and reduce expenses.
  • Calculate Costs. Assess the specific needs in your facility and develop a plan to convert to more innovative, cost effective solutions. When evaluating your current expenses and researching other options, you’ll feel more empowered to make a decision in your maintenance program and potentially get more bang for your buck.
  • Outline Opportunities. Building an effective facility maintenance program requires weighing the pros and cons. Presenting various options and showcasing the advantages of a proposed program will help you establish a customized plan for your facility.

Don’ts

  • Rely on the Bare Minimum. You shouldn’t have to settle when it comes to the cleanliness of your facility. While your current maintenance program may be sufficient, there is always an opportunity to enhance it. When you analyze your program, you may discover new ways to achieve a higher level of clean.
  • Guesstimate. There’s no need to play the guessing game with your facility maintenance program. Many modern tools are available to you for free online to assist you in planning and executing the very best solution strategies.
  • Short-Change on Change. Every facility is unique and requires solutions customized to their specific needs. While modeling your maintenance plan off of another facility’s may be easy and effective, make sure you take the time to evaluate what’s best for your facility. Building an exclusive plan may present you with various new opportunities.

For more solutions or guidance on creating a facility maintenance program, visit betco.com to learn about our innovative resources and training sessions.

HunterGilesRGB
Hunter is the Content Marketing Specialist at Betco.

If you have any questions, please visit http://www.betco.com, call (888) GO-BETCO or please contact us at welisten@betco.com

iBet Blog #1 Image

7 Smart Habits to Stay on Track

Startup Stock PhotosThe way we do things are constantly evolving. This can make keeping up with industry trends extremely time-consuming and challenging. New technologies, processes and programs are emerging all over the place and may have you wondering what you can do to stay on track in your industry. While these trends rapidly disseminate, there are several habits you can start now to stay up-to-date.

  1. Have a plan. Become aware of your strengths and weaknesses and focus on what goals you can build from them. Setting goals will give you something to work towards, furthering your abilities and skills.
  2. Hold yourself accountable. Once you establish your goals, make it your mission to achieve them. Put in the time and effort it takes to reach your objective. The end result will be well worth it!
  3. Read, listen and watch. Attending online webinars and onsite training sessions will expand your knowledge. Look for opportunities to engage in the latest and greatest trends in your industry.
  4. Back-up your knowledge with tools. There are various training programs that are available at no cost to you. Certifications will show your expertise and proficiency.
  5. Keep your skills current. Look out for the most relevant skill-sets in your industry and pursue opportunities to make them one of your strengths.
  6. Seek professional development opportunities. Building a network of like-minded individuals that encourage your professional growth can help you reach or even surpass your goals.
  7. Pay attention to updated materials within your industry. Minimize mistakes by ensuring you are utilizing the most current tools.

HunterGilesRGB
Hunter is the Content Marketing Specialist at Betco.

If you have any questions, please visit http://www.betco.com, call (888) GO-BETCO or please contact us at welisten@betco.com.

Floor and Salt

Don’t Let Winter A-SALT Your Floors

Boots in FrostWinter is in full swing and is taking charge with snow, slush and ice. While bundling up and staying warm inside, make sure you don’t give your floors the cold shoulder. It’s important to be aware of the dangers that the winter elements can leave behind on both carpet and hard surface floors.

As people come and go in a facility they stomp, shake and dump snow, slush and salt on floors everywhere. This snowy, slushy mess doesn’t end after it dries and leaves behind un-melted rock salt. Stains as white as snow can be seen on all types of floor surfaces. While these stains are pesky and damaging, they are preventable and your floors are savable.

Salt stains are not harmful if attended to quickly. The faster you remove the moisture and chemicals, the less time they have to damage your floors. Keep absorbent towels or rags near your doors to clean up the messes as they occur, and a vacuum or broom to remove any dry residue.

Use a reliable matting system. A matting system acts as a first line of defense against tracked-in contaminants on your floors. Over 80% of dirt and residue are brought in by people entering a facility; a good entrance matting system can trap 90% of this dirt and debris that is brought in!

Prevention is the best defense. It’s important to keep in mind that all floor types are vulnerable during the winter. Using a daily maintenance cleaner is one of the most important steps to extend the life of your floors.

It is important to keep in mind that your floors are vulnerable during the winter. While there is danger afoot due to a combination of increased moisture and salt, remember to practice the above tips to avoid havoc on both carpet and hard surface floors.

HunterGilesRGB
Hunter is the Content Marketing Specialist at Betco.

If you have any questions, please visit http://www.betco.com, call (888) GO-BETCO or please contact us at welisten@betco.com.

green floorcare

Green Floorcare Means No Weak Links

Several years ago, Dr. Greg Norris of the Harvard School of Public Health, made a startling observation when it comes to green floors and green floorcare. He concluded that many green floors while designed to be sustainable and reduce a facility’s environmental foot print, may lose all of these benefits the first time they are cleaned, stripped, or refinished using conventional floorcare products such as cleaners, restorers, strippers, and floor finishes. Continue reading

water concerns

Serious Water Concerns Require Smart Solutions

Water concerns throughout the United States are mounting!

According to an August 2014 article published in National Geographic Magazine, groundwater, also known as aquifers, provide us with freshwater that makes up for surface water now being lost from drought-depleted lakes, rivers, and reservoirs. “[But] we are drawing down these hidden, mostly nonrenewable groundwater supplies at unsustainable rates in the western United States and in several dry regions globally, threatening our future,” warns Dennis Dimick National Geographic’s Executive Editor for the Environment.

What’s happening is that we are turning to groundwater to make up for the water normally collected due to rainfall events, which is used for drinking water, irrigation for landscaping and farming, and most all of the other ways we use water every day. However, Dimick goes on to say that while we are doing this, groundwater supplies nationwide have been depleted “dramatically since 2000.”  Continue reading

Introducing Spectaculoso ™ in FastDraw!

Spectaculoso fastdraw

 

Spectaculoso ™

…in FastDraw is here and ready to ship.

The perfect choice for any cleaning task, this product is nonflammable and noncorrosive. Clean and deodorize most water-washable surfaces with this fantastic lavender cleaner. Formulated without inorganic phosphates, it will not harm most surfaces nor create streaks, film or cause surfaces to dull.

BioActive Solutions ™ Rebranded

bioactive solutions rebrandRebranded with New Sales Content, New Product and a New Look!

The BioActive Solutions line has been revamped with modified names, up to date marketing materials, and new label designs. Marketing materials have been updated to make things simpler and easy to understand. Along with the rebrand, the marketing materials will detail the role of bacteria, what they are, how they work, why they work, and who they work for.

SmartValve® Auto Combo Kit

We are pleased to announce 3 great additions to the Betco® General Cleaning Category of products…

smartvalve auto combo kit

SmartValve® Auto Combo Kit

In Stock and Available for Shipment!

The perfect combination of water conservation and odor control. First the popular SmartScreen® has a 1-2 punch of odor control in two great fragrances. Second the automated valve has two unique functions that allow it to conserve water like no other system on the market. These features are ideal for Schools, Universities, Stadiums, Convention Centers, Hospitality, Large Manufacturing Plants or Large Office Campuses.

Conserve Water and Save Money

  • Timed Programmable Flush - toggle between 2hr, 4hr, 6hr or 8hr timed flush cycle
  • Sleep Mode (smart technology) - shuts itself off during extended periods of non-use like weekends and holiday shut downs
  • Versatility - toggle between: urinal mode (timed flush) and toilet mode (flush after every use)

Click Here to watch the SmartValve Intro Video

Click Here to watch the SmartValve Installation Video

What Is The Best Orbital Floor Machine For You?

Orbital floor machines are quickly becoming one of the most popular new machines for janitorial and custodial professionals.  With so many of these new products on the market, how can you decide which one is best for you?  This guide will help you make the most informed purchasing decision possible.

Weight Equals Performance

Weight makes all the difference when it comes to orbital floor machines.  Machines with the greatest head pressure prove to be the most efficient and effective for any surface prep or cleaning task.  Your floors will strip faster, screen better, and scrub more effectively with a heavier machine.  A 150 pound machine will perform better than a 100 pound machine and a 200 pound machine will perform better than a 150 pound machine.  When choosing an orbital machine always look for a model that weighs more than 200 pounds.  Of course, be sure that the machine has removable weights so that the machine can be made lighter if needed for transport purposes.

Continue reading

Tips For Removing Gum and Adhesives from Carpets

Even when it appears that gum or adhesives have been removed, they sometimes reappear a few days later. This is because some of the sticky residue remains in the carpet.

The following are suggestions for removing gum and adhesives from carpets:

• Scrape. Scrape off as much of the gum/adhesive as possible. Freezing the gum and “chipping” it off is also an option. Continue reading

Don’t Get Backed Into A Corner: Tips For Refinishing Floors

One of the more challenging and time-consuming steps in stripping and refinishing floors is ensuring that the edges and corners are free of finish and dirt buildup.

Look like a professional by taking the extra time to remove all the finish from the edges and corners.

The following process is recommended to make your next strip and recoat look its best:

  1. Make sure you have proper personnel protective equipment such as gloves and safety goggles and set up wet floor signs.
  2. Properly dilute the stripper according to label directions.refinishing floors, floor finish. floor, tile, vct tile, school
  3. Pour the stripper onto the floor and let it sit or dwell for 10 minutes.
  4. Take a razor blade scraper on an extension pole and scrape the edges of the floor along the baseboards or display shelves.
  5. Use a “Doodle Bug” and a black strip pad to remove any excess finish along the edges.
  6. Take a floor squeegee to pull the stripper solution from along the edges onto the center of the aisle.
  7. Pick up solution with an auto scrubber.
  8. Rinse the floor with clean water if necessary.
  9. Apply new floor finish along the edges with the first and final coat. All other coats in between should not go any closer than a few inches of the edge. This will help speed up the removal process next time around.

 

Rob

Rob Dodson
Product Manager, Floor Care, Betco Corporation
rdodson@betco.com

Rob is an avid Cleveland sports fan and hopes to one day experience a championship. He also enjoys hanging out with his wife and 3 kids.

 

 

Summer School – The Time To Clean

The summer months can be some of the busiest and most important months when it comes to school cleaning. To ensure your custodial team is productive summer school and to help simplify the process, share these top ten recommendations.

apple, betco, summer cleaning, cleaning, schools, summer school, go green, education, floor care 1. Prepare a written plan as to who will tackle which projects and when.

2. Divide and conquer. Big summer cleanup projects usually involve floor care; before doing any floor-care work, divide the facility into different categories. Such as those that will be stripped/refinished, those that will only be scrubbed, and those that need only detail cleaning.

3. Clean up those closets. Go through janitorial closets and properly discard any chemicals or other products that have expired. Typically, chemicals should never be stored for more than one year.

4. Go green. Start making the shift to go Green. Special green cleaning training may be required  during this transition, and summer break can provide that extra time.

5. Get Equipped. Evaluate all of your cleaning equipment; determine which machines are running properly, which need servicing, and which should be replaced.

Continue reading

New Product: Express® with SRT

New from Betco Express® with Scuff Resistant Technology™. Betco Express with SRT is a fast drying, fast curing, and extremely low odor floor finish with superior black heel mark resistance. Betco Express with SRT is formulated with Max-Cure™ Technology that utilizes a highly durable, internally cross-linked polymer, specially blended to minimize dry and cure times. This labor savings, one of a kind floor finish can be re-coated in as little as 10-15 minutes allowing up to six coats in one hour.

This new and improved finish will have the same great price and SKU’s! Available August 4th, 2014 for shipment. Click below to watch our new Express with SRT video.

Express with SRT Launch from Betco Corporation on Vimeo.