Floor and Salt

Don’t Let Winter A-SALT Your Floors

Boots in FrostWinter is in full swing and is taking charge with snow, slush and ice. While bundling up and staying warm inside, make sure you don’t give your floors the cold shoulder. It’s important to be aware of the dangers that the winter elements can leave behind on both carpet and hard surface floors.

As people come and go in a facility they stomp, shake and dump snow, slush and salt on floors everywhere. This snowy, slushy mess doesn’t end after it dries and leaves behind un-melted rock salt. Stains as white as snow can be seen on all types of floor surfaces. While these stains are pesky and damaging, they are preventable and your floors are savable.

Salt stains are not harmful if attended to quickly. The faster you remove the moisture and chemicals, the less time they have to damage your floors. Keep absorbent towels or rags near your doors to clean up the messes as they occur, and a vacuum or broom to remove any dry residue.

Use a reliable matting system. A matting system acts as a first line of defense against tracked-in contaminants on your floors. Over 80% of dirt and residue are brought in by people entering a facility; a good entrance matting system can trap 90% of this dirt and debris that is brought in!

Prevention is the best defense. It’s important to keep in mind that all floor types are vulnerable during the winter. Using a daily maintenance cleaner is one of the most important steps to extend the life of your floors.

It is important to keep in mind that your floors are vulnerable during the winter. While there is danger afoot due to a combination of increased moisture and salt, remember to practice the above tips to avoid havoc on both carpet and hard surface floors.

HunterGilesRGB
Hunter is the Content Marketing Specialist at Betco.

If you have any questions, please visit http://www.betco.com, call (888) GO-BETCO or please contact us at welisten@betco.com.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>