Don’t Get Backed Into A Corner: Tips For Refinishing Floors

One of the more challenging and time-consuming steps in stripping and refinishing floors is ensuring that the edges and corners are free of finish and dirt buildup.

Look like a professional by taking the extra time to remove all the finish from the edges and corners.

The following process is recommended to make your next strip and recoat look its best:

  1. Make sure you have proper personnel protective equipment such as gloves and safety goggles and set up wet floor signs.
  2. Properly dilute the stripper according to label directions.refinishing floors, floor finish. floor, tile, vct tile, school
  3. Pour the stripper onto the floor and let it sit or dwell for 10 minutes.
  4. Take a razor blade scraper on an extension pole and scrape the edges of the floor along the baseboards or display shelves.
  5. Use a “Doodle Bug” and a black strip pad to remove any excess finish along the edges.
  6. Take a floor squeegee to pull the stripper solution from along the edges onto the center of the aisle.
  7. Pick up solution with an auto scrubber.
  8. Rinse the floor with clean water if necessary.
  9. Apply new floor finish along the edges with the first and final coat. All other coats in between should not go any closer than a few inches of the edge. This will help speed up the removal process next time around.

 

Rob

Rob Dodson
Product Manager, Floor Care, Betco Corporation
rdodson@betco.com

Rob is an avid Cleveland sports fan and hopes to one day experience a championship. He also enjoys hanging out with his wife and 3 kids.

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>